The Madden cut-off machine is a standalone piece of equipment. The press can be operated at the job site or in the shop. The keyholes will accept the truss head bolt with the long slots. The press will cut up to 20 gauge full hard material. The press cuts and punches six slots; three on the exit side and three on the entrance. 12 1/2-inch on center for the lighter materials. Each die is identical; therefore replacing parts is easy. Total weight is 843 pounds. Die can be removed with four bolts reducing the overall weight. See your distributor for cost and availability. MADDEN CONSULTING: (800) 272-2071. Circle 200

The revolutionary CAT-5 HURRICANE NETTING SYSTEM™ is the first of its kind to offer do-it-yourself or professionally installed enhanced storm protection for all that is exposed to weather. Use this system along with shutters to protect the roof of your house, manufactured homes, sheds, boats, cars, construction debris, landscaping or anything that can be netted for extra protection. Impact versions of the product protect glazed openings, porches or impact windows from cracking from flying debris. System allows light and air to pass through while offering strong protection from dangerous winds and flying debris. If you can put up a blue tarp, you can put up the CAT-5 Hurricane Netting System™. Visit www.hurricane-net.com. Circle 202

Close the deal now with DR. SHUTTER’s new handheld estimator. It’s the dealmaker. Your salesman simply enters the raw width, height and any product-specific or job-related extra charges into a state-of-the-art handheld and instantaneously a bid for up to 14 different products is produced. Dr. Shutter’s personal computer software program eliminates the errors caused by manually calculating the parts required to make shutters. Automate the process of calculating and estimating accordion, Bahama, Colonial, panel, rollup and storm door product lines. A bill of materials and cost of job report, inclusive of direct material, factory overhead and a link to an installation and permit draw module make it the optimum package for the efficient and cost conscious fabricator. For information, call (305) 667-1022.
Circle 201

The storm panel three-hole combination cut-off die from JUMBO MANUFACTURERS AND ENGINEERING, INC. cuts to length and punches three holes simultaneously. These machines are manufactured to suit your profile and hole preference. Features include:
•    Air operated—125 psi
•    Foot switch—110-volt activates solenoid air valve
•    Dimensions : 26 in. x 26 in. x 60 in. high.
•    Nine-foot scaled stop one side.
•    Scute guides for slugs.
•    Delivery three weeks from order.
Other models also available.
Call (727-942-6552 for more information.
Circle 203